The C&K’s PTS125 series 12mm tactile switches are most often seen used in industrial, consumer products, instrumentation and computing equipment. This switch is snap fit, and required actuating force is 130 gms. This switch has pegs and a 7.3 mm square snap fit actuator. Also, it has 1 million working (life) cycles. It has bounce time of less than 5 ms, and operating temperature of -40?C to 85?C.
Maximum voltage is 12 Vdc and maximum current is 50 mA
Dielectric strength of 250 Vac (1 mn)
Contact resistance of less than 100 mΩ and insulation resistance of more than 100 MΩ
| 屬性 | 數值 |
|---|---|
| 觸點配置 | SPST |
| 接端類型 | 通孔 |
| 開關操作 | 單刀單擲 - 常開 |
| 執行器顏色 | 黑色 |
| 執行器類型 | 按鈕式 |
| 安裝類型 | 通孔安裝 |
| 觸點額定電流 | 0.6 VA |
